CD-1 Review of Mu2e
June 5-7, 2012

Tracker

The Mu2e tracker provides the primary momentum measurement for conversion electrons. The tracker must identify and measure 105 MeV/c electrons while rejecting backgrounds, and it must provide this functionality while situated in the warm, evacuated bore of a superconducting solenoid that provides a uniform magnetic field of 1 Tesla.

Tracker Design, Schedule and Planning Documents

Title Mu2e-doc-# Title Mu2e-doc-#
Conceptual Design Report
(see Chapter 9: Tracker)
1169 Tracker Interfaces 1562
WBS Dictionary for Tracker 2157 Milestone Dictionary for Tracker 2158
Engineering Risk Assessment for the Tracker 2223 Tracker Requirements 732

Tracker BOE Documents

Existing supporting documentation is either bundled with its associated BOE documents or referenced within them.

WBS Number Task Name Mu2e doc #
475.06.01 Project Management 2165
475.06.01.02   Requirements 2166
475.06.02 Straws
475.06.02.01   Mechanical R&D 2167
475.06.02.02   Time Division R&D 2168
475.06.02.03   Straw Stringing 2169
475.06.03 Straw Assemblies
475.06.03.01   Plane R&D 2170
475.06.03.02   Gas Manifold 2171
475.06.03.03   Station Prototype 2172
475.06.03.04   Mechanical Support (for the full tracker) 2173
475.06.03.05   General 2174
475.06.04 Front End Electronics
475.06.04.01   Preamp 2175
475.06.04.02   Digitizer 2176
475.06.04.03   Readout Controller 2177
475.06.04.04   Test Stands 2178
475.06.05 Infrastruture
475.06.05.01   Gas System 2179
475.06.05.02   High Voltage System 2180
475.06.05.03   Low Voltage System 2181
475.06.05.04   Cooling 2182
475.06.05.05   Cabling and Control 2183
475.06.06 Detector Assembly and Installation 2184

For assistance in obtaining any documentation, references, etc., please contact . For document content questions, please contact the appropriate L2 manager (see Project Contact List).

Top of page

Last modified: 06/05/2012 |